Difference between revisions of "e-puck2 radio module development"

From GCtronic wiki
Jump to: navigation, search
(Usage)
(Usage)
Line 54: Line 54:
 
# Take the robot chosen to be a no-DP-3T actor; put the selector in position 15 then turn it on (the robot must be turned on with the selector in position 15); after start, the top front LED will turn on for 3 seconds, during this period you need to select the role, in this case put the selector in position e.g. 14; then the LED will turn off and the robot will start moving around avoiding obstacles
 
# Take the robot chosen to be a no-DP-3T actor; put the selector in position 15 then turn it on (the robot must be turned on with the selector in position 15); after start, the top front LED will turn on for 3 seconds, during this period you need to select the role, in this case put the selector in position e.g. 14; then the LED will turn off and the robot will start moving around avoiding obstacles
 
# Repeat step 3 and 4 for all the robots you want to use for each role
 
# Repeat step 3 and 4 for all the robots you want to use for each role
 +
Now have fun seeing how the simulation evolves. You can have a look at the following video as an example:
 +
 +
The following state diagrams illustrates the details of the simulation; you can analyze them to deeply understand what is happening for each role.
  
 
===Building===
 
===Building===

Revision as of 13:13, 5 June 2020

e-puck2 main wiki

Introduction

Espressif provides the Espressif IoT Development Framework (ESP-IDF for short), that is a framework for developing applications based on the Espressif ESP32 chip. The firmwares developed for the e-puck2 radio module are based on this framework.
The software development framework provided by Espressif is intended for rapidly developing Internet of Things (IoT) applications, with Wi-Fi, Bluetooth, flexible power management and other advanced system features.
Users can develop applications in Windows, Linux and MacOS based on ESP-IDF.
The C programming language is used to develop code for the radio module of the e-puck2 robot and the ESP-IDF includes the FreeRTOS real time operating system.

Development environment

In order to build the firmware you need to install the toolchain, refer to http://esp-idf.readthedocs.io/en/latest/get-started/#setup-toolchain.
Once installed you can issue the command make flash from the directory Projects\ESP32_E-Puck_2 to build the firmware.
For more information have a look at http://esp-idf.readthedocs.io/en/latest/get-started/#build-and-flash.

Debugging

You can debug your code by printing some information on the serial port, then from the PC you can read these information by opening the Serial Monitor port (have a look at the chapter Finding the USB serial ports used to know what ports are availables).

Get the source code

The radio module firmware source code can be downloaded with the command:
git clone --recursive https://github.com/e-puck2/esp-idf.git

WiFi

The radio module wifi firmware source code can be downloaded with the command:
git clone -b wifi --recursive https://github.com/e-puck2/esp-idf.git

Example projects

COVID-19

We implemented some basic concepts of local infection transmission and proximity tracing exploiting Bluetooth 4 on our robot e-puck2. The goal is to provide an open source framework and to visualize the positive effect of proximity tracing APP within a pandemic such as COVID-19. Such a simulation and demonstration can be extended by the community and we do not pretend that this initial effort is scientifically valid. However already with the initial parameters it becomes clear that self-quarantine triggered by a proximity tracing APP is beneficial.

We implemented a simplified version of the DP-3T protocol (no actual code used from this repo).The following image shows a general overview of the architecture:

We use Bluetooth for both proximity tracing, as in reality, and infectivity, that is encoded in the advertisement packet together with the robot ID. The proximity of a robot is detected using the BLE signal strength. A computer is designed for acting as the DP-3T server, listening for incoming WiFi connections (TCP) from the robots and maintaining the list of infected robots. No privacy handling is involved.

Here is a list of interesting features exploited from the robot capabilities:

  • simultaneous BLE scanning and advertising
  • BLE and WiFi cohexistence
  • proximity detection through BLE signal strength (RSSI)

Preparation

For running the demo you need a computer acting as the server and at least 3 robots, even if the more robots you have, the better.
For each e-puck2 robot you need to:

On the computer you need to install Python 3 in order to run the server script that you can download from here server.py.
Prepare an arena big enough to contain all the robots that will move around avoiding obstacles once turned on.

Usage

There are 3 roles available for the simulation; each role is chosen by using the selector position:

  • patient zero: this is the robot that will start the infection spread by starting being contagious; this is thought to be only one robot; selector position 0
  • DP-3T actor: one or more robots; selector position 15
  • no DP-3T actor: one or more robots; any selector position, but 15 and 0

For running the demo follow these steps:

  1. Run the Python script on the computer
  2. Take the robot chosen to be the patient zero; put the selector in position 15 then turn it on (the robot must be turned on with the selector in position 15); after start, the top front LED will turn on for 3 seconds, during this period you need to select the role, in this case place the selector in position 0; then the LED will turn off and the robot will start moving around avoiding obstacles
  3. Take the robot chosen to be a DP-3T actor; put the selector in position 15 then turn it on (the robot must be turned on with the selector in position 15); after start, the top front LED will turn on for 3 seconds, during this period you need to select the role, in this case keep the selector in position 15; then the LED will turn off and the robot will start moving around avoiding obstacles. The robot will connect also to the server, beware that the server IP address is hard-coded in the software (192.168.1.8), thus if your server has a different IP address then you need to rebuild the firmware, refer to section COVID19 - Building
  4. Take the robot chosen to be a no-DP-3T actor; put the selector in position 15 then turn it on (the robot must be turned on with the selector in position 15); after start, the top front LED will turn on for 3 seconds, during this period you need to select the role, in this case put the selector in position e.g. 14; then the LED will turn off and the robot will start moving around avoiding obstacles
  5. Repeat step 3 and 4 for all the robots you want to use for each role

Now have fun seeing how the simulation evolves. You can have a look at the following video as an example:

The following state diagrams illustrates the details of the simulation; you can analyze them to deeply understand what is happening for each role.

Building