e-puck2 radio module development: Difference between revisions
No edit summary |
|||
| Line 6: | Line 6: | ||
Users can develop applications in Windows, Linux and MacOS based on ESP-IDF.<br/> | Users can develop applications in Windows, Linux and MacOS based on ESP-IDF.<br/> | ||
The <code>C programming</code> language is used to develop code for the radio module of the e-puck2 robot and the ESP-IDF includes the FreeRTOS real time operating system. | The <code>C programming</code> language is used to develop code for the radio module of the e-puck2 robot and the ESP-IDF includes the FreeRTOS real time operating system. | ||
=Development environment== | |||
In order to build the firmware you need to install the toolchain, refer to [http://esp-idf.readthedocs.io/en/latest/get-started/#setup-toolchain http://esp-idf.readthedocs.io/en/latest/get-started/#setup-toolchain].<br/> | |||
Once installed you can issue the command <code>make flash</code> from the directory <code>Projects\ESP32_E-Puck_2</code> to build the firmware.<br/> | |||
For more information have a look at [http://esp-idf.readthedocs.io/en/latest/get-started/#build-and-flash http://esp-idf.readthedocs.io/en/latest/get-started/#build-and-flash].<br/> | |||
=Get the source code= | =Get the source code= | ||
Revision as of 13:26, 17 December 2018
1 Introduction
Espressif provides the Espressif IoT Development Framework (ESP-IDF for short), that is a framework for developing applications based on the Espressif ESP32 chip. The firmwares developed for the e-puck2 radio module are based on this framework.
The software development framework provided by Espressif is intended for rapidly developing Internet of Things (IoT) applications, with Wi-Fi, Bluetooth, flexible power management and other advanced system features.
Users can develop applications in Windows, Linux and MacOS based on ESP-IDF.
The C programming language is used to develop code for the radio module of the e-puck2 robot and the ESP-IDF includes the FreeRTOS real time operating system.
2 Development environment=
In order to build the firmware you need to install the toolchain, refer to http://esp-idf.readthedocs.io/en/latest/get-started/#setup-toolchain.
Once installed you can issue the command make flash from the directory Projects\ESP32_E-Puck_2 to build the firmware.
For more information have a look at http://esp-idf.readthedocs.io/en/latest/get-started/#build-and-flash.
3 Get the source code
The radio module firmware source code can be downloaded with the command:
git clone --recursive https://github.com/e-puck2/esp-idf.git
3.1 WiFi
The radio module wifi firmware source code can be downloaded with the command:
git clone -b wifi --recursive https://github.com/e-puck2/esp-idf.git