e-puck2 mobile phone development: Difference between revisions
Jump to navigation
Jump to search
| Line 14: | Line 14: | ||
The main microcontroller wifi firmware source code can be downloaded with the command:<br/> | The main microcontroller wifi firmware source code can be downloaded with the command:<br/> | ||
<code>git clone --recursive -b wifi https://github.com/e-puck2/e-puck2_main-processor.git</code><br/> | <code>git clone --recursive -b wifi https://github.com/e-puck2/e-puck2_main-processor.git</code><br/> | ||
The radio module ble firmware source code can be downloaded with the command:<br/> | The radio module ble firmware source code can be downloaded with the command:<br/> | ||
<code>git clone --recursive -b ble_spp https://github.com/e-puck2/esp-idf.git esp-idf_ble</code><br/> | <code>git clone --recursive -b ble_spp https://github.com/e-puck2/esp-idf.git esp-idf_ble</code><br/> | ||
Revision as of 13:58, 5 September 2018
1 Robot configuration
For working with Bluetooth Low Energy, the main microcontroller and radio module must be programmed with dedicated firmwares (not the factory ones); notice that the main microcontroller firmware is the same used with WiFi:
- main microcontroller wifi firmware, for information on how to update the firmware refer to section main microcontroller firmware update
- radio module ble firmware (04.09.18), for information on how to update the firmware refer to section radio module firmware update
Put the selector in position 15.
Section Connecting to the BLE gives step by step instructions on how to accomplish your first BLE connection with the robot.
2 Connecting to the BLE
3 Get the source code
The main microcontroller wifi firmware source code can be downloaded with the command:
git clone --recursive -b wifi https://github.com/e-puck2/e-puck2_main-processor.git
The radio module ble firmware source code can be downloaded with the command:
git clone --recursive -b ble_spp https://github.com/e-puck2/esp-idf.git esp-idf_ble