Search results
Jump to navigation
Jump to search
- I2C is used to let communicate various elements present in the robot, Pi-puck and extensions. An overall schema is shown in the fol ...al should display the Raspberry Pi booting information. If the robot isn't present, then you can directly power on the extension board with the related button ...40 KB (6,572 words) - 14:14, 6 March 2024
- ...the package directory; beware that only one <code>elf</code> file must be present inside this directory<br/> ...36 KB (5,663 words) - 14:57, 10 January 2024
- ...t of features that is shown the ''android.hardware.usb.accessory'' must be present. If you are intereseted you can find the source code from the following lin ...66 KB (9,829 words) - 12:36, 27 January 2023
- ...code>AdoptOpenJDK JDK with Hotspot xxx</code> install. If this entry isn't present, then you need to install it: ...54 KB (8,949 words) - 07:46, 26 April 2023
- :*uSD state: 1 if the micro sd is present and can be read/write, 0 otherwise ...51 KB (8,334 words) - 09:10, 17 August 2023
- ...Hz, thus also the e-puck camera and the LSM330 (accelerometer + gyroscope) present with e-puck HwRev 1.3.<br/> ...69 KB (11,247 words) - 11:50, 27 January 2023