Omnivision Module V3

From GCtronic wiki
Revision as of 09:07, 14 May 2019 by WikiSysop (talk | contribs) (Blob tracking)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Overview

Features:

  • 5Mpixel color camera looking 360° all around the robot
  • compatible with Pi-puck and interfaced with the Raspberry Pi Zero W
  • parabolic mirror for uniform pixel distribution

Image grabbing

You can use raspistill to grab an image with the command: raspistill -t 0 -k -o image.jpg.
This command open a live preview of the camera. When you press ENTER, an image is grabbed. To terminate press x+ENTER.
You can find detailed documentation about raspistill in the following link https://www.raspberrypi.org/documentation/raspbian/applications/camera.md.

Image unwrapping


OpenCV

Blob tracking

A simple demo was developed to track an orange blob. It is thought to be run with the omnivision extension. The robot rotate in place towards the target when it finds one.
The code can be downloaded from the following repo: git clone https://github.com/e-puck2/e-puck2_pi_blob-tracking.git
Refer to the github page for information about building and running this demo.
This example is available in the system in the directory /home/pi/e-puck2_pi_blob-tracking.
This directory includes a simple launch script for the demo that can be run with the command ./omni_detect_blob.sh; the color parameters given are supposed to follow a pink object.
Beware that this directory isn't garanted to be synced with the last repository version, thus to get the last version use git pull and then rebuild.