Difference between revisions of "Omnivision Module V3"

From GCtronic wiki
Jump to: navigation, search
Line 4: Line 4:
 
* compatible with Pi-puck and interfaced with the Raspberry Pi Zero W
 
* compatible with Pi-puck and interfaced with the Raspberry Pi Zero W
 
* parabolic mirror for uniform pixel distribution
 
* parabolic mirror for uniform pixel distribution
 +
 +
=Image grabbing=
 +
You can use <code>raspistill</code> to grab an image with the command: <code>raspistill -t 0 -k</code>.
 +
 +
You can find detailed documentation about <code>raspistill</code> in the following link [https://www.raspberrypi.org/documentation/raspbian/applications/camera.md https://www.raspberrypi.org/documentation/raspbian/applications/camera.md].
  
 
=Image unwrapping=
 
=Image unwrapping=

Revision as of 08:37, 14 May 2019

Overview

Features:

  • 5Mpixel color camera looking 360° all around the robot
  • compatible with Pi-puck and interfaced with the Raspberry Pi Zero W
  • parabolic mirror for uniform pixel distribution

Image grabbing

You can use raspistill to grab an image with the command: raspistill -t 0 -k.

You can find detailed documentation about raspistill in the following link https://www.raspberrypi.org/documentation/raspbian/applications/camera.md.

Image unwrapping


OpenCV

Blob tracking

A simple demo was developed to track an orange blob. It is thought to be run with the omnivision extension. The robot rotate in place towards the target when it finds one.
The code can be downloaded from the following repo: git clone https://github.com/e-puck2/e-puck2_pi_blob-tracking.git